Panasonic Software PLC Software

[Download] FPWIN GR Panasonic PLC Programming Software

Written by

FPWIN GR V2.94 is Panasonic’s software used to program the included small-sized PLCs: FPXH/FPX0, FP-E, FP-SIGMA, FP0/FP0R, FP1, FP-M, FP2/FP2SH, FP3/FPC, FP5 / FP10/FP10S/FP10SH

Hardware configuration required

+ CPU: 1GHZ or Higher

+ RAM: 512MB or More

+ DISK: 100MB or More

+ Screen: 1024×768 or Higher

+ Communication: USB, RS232, Enthernet

Step-by-step installation instructions with pictures

+ Step 1: Download and extract the software with the password

+ Step 2: Run the Setup file and select Next

+ Step 3: Agree to the terms of use of the software

+ Step 4: Open the file Key_Install and proceed to enter Key in this step

+ Step 5: Select Next to begin installing the software

+ Step 6: Wait for the software to be installed very quickly

Select Finish when the installation is complete

Video installation instructions FPWIN GR

Link Download FPWINGR Software

1. GoogleDrive Link

>>> Download FPWIN GR V2.94 Panasonic Software

2. MediaFire Link

>>> Download FPWIN_GR_V2.94_Panasonic_Software

Password Extract:


If you have any difficulty in the process of downloading or installing the software as well as needing assistance with Panasonic PLC programming, please comment below the article or contact me via email. Thanks

About the author


Leave a Comment Protection Status