[Making Cable] DELTA HMI Programming Cable

The DELTA DOP-Series monitor is one of the most widely used in industry. With its competitive price and good quality, it can be found in a lot of small machines

Therefore, plc247.com will guide you to make your own DELTA HMI programming cable to save costs and from easy-to-find or available items in the factory.

Preparation

1. Jack port COM-DB9 Male (Connect to the RS232 port of the PLC)

2. Jack port COM-DB9 Female (Connect to a computer)

Make the Cable

Please weld according to the diagram below

Please solder the correct pins according to the diagram, then make sure the cable will work.

Like and share the article if you find it helpful

Thanks and best regards!