HMI-SCADA Software PLC Software Siemens Software

[Download] TIA Portal V12 Full (GoogleDrive)

Written by plc247.com

TIA Portal V12 is the first official version to support Windows 64bit operating systems. TIA Portal was created to replace the old Siemens software

Previously every Siemens line of automation devices had its own programming software. Sometimes it is inconvenient as the link between them, installing many software, researching using many different software …. makes us spend too much time and effort.
So Siemens has made great strides to integrate such software into a single software, the TIA Portal.

The old software has integrated into TIA Portal:

+ Step7 programming for S7 300, S7 400, … has been replaced with Step7-V12 in TIA Portal V12.

+ WinCC Flexible programming for Siemens displays … replaced with WinCC-V12 in the TIA Portal.

+ WinCC 7.x – programming for Scada is also replaced by WinCC V12 in TIA Portal.

+ Starter – programming the inverter … replace it with Smartdrive in TIA Portal.

+ With new Siemens product lines such as Basic, Comfort and S7 1200, S7 1500 screens, it is imperative to use TIA Portal.

Link Download TIA Portal V12 Full

+ Download STEP7_V12_Professional_Part.1
+ Download STEP7_V12_Professional_Part.2

+ Download WinCC_V12_Professional_Part.1
+ Download WinCC_V12_Professional_Part.2

+ Download WinCC_V12_Comfort_Advanced_Part.1
+ Download WinCC_V12_Comfort_Advanced_Part.2

+ Download SIMATIC_S7_PLCSIM_V12

+ Download SINAMICS_StartDrive_V12

+ Download SIMATIC_TIAP_V12_UPD1.exe

+ Download SIM_EKB_2018_11_14

Password Extract: plc247.com

=========

If the download link is broken or there is a problem during the installation process, please comment below the article. Best regards!

About the author

plc247.com

30 Comments

Leave a Comment

DMCA.com Protection Status