TIA Portal V15.1 is one of the most stable versions of Tia Portal that Siemens has released. plc247.com is also using this version to make projects.
I have uploaded the full version of Tia Portal V15.1 on my Website including all the Software in the TIA Portal V15.1 package.
However, today I would like to share with you the software that we use the most, as well as the most people look for when using Tia Portal.
>>> STEP7 & WinCC Professional & WinCC Runtime Profession V15.1
This version is the standard version of Siemens , with ISO and Exe installer extension that is extremely easy for installation.
Supported Operating Systems
+ Microsoft Windows 7 (64bit)
+ Microsoft Windows 8 (64bit)
+ Microsoft Windows 8.1 (64bit)
+ Microsoft Windows Server 2016 or higher
+ Microsoft Windows 10/11 (64bit)
Detailed Installation Instruction Video
Software Download Link 
All download files are download files directly uploaded to GoogleDrive for easy download
+ Download STEP 7 Professional & WinCC Professional V15.1 Full
+ Download Automation License Manager V6.0 SP8
(From 2021, it is mandatory to install this version of ALM or higher for Siemens software to run)
+ Download WinCC V15.1 Runtime Professional
+ Download NET Framework 3.5 & Sim EKB Install
Password Extract: plc247.com
======
Thanks and Best Regards!
can’t be installed
what happen for you ?
what is the pasword of rar file ?
password: plc247.com
I have password problem
password: plc247.com
Thank you for sharing
Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz 1.80 GHz 4.00 GB (3.88 GB usable) 64-bit operating system, x64-based processor Is my laptop can install this soft?
and if can’t then which version should try?
Minimum 8GB RAM sir
Hey guys!
Do you have any website to free downloads of drawing softwares (like AutoCad, SolidWorks, etc) to indicate ?
Thanks!
i don’t have sir
Hi Can you include SINAMICS Startdrive for TIA V15.1?
search on my website have
Download WinCC V15.1 Runtime Professional
when i try to download it, i got a notification as below
>>
This file cannot be viewed or downloaded at this time.
This file has been viewed or downloaded by too many users recently. Try accessing the file again later. If the file is particularly large or has many users accessing it, it may take up to 24 hours before you can view or download it. If you still cannot access it after 24 hours, contact your domain administrator.
<<
can you please fix it
Need waiting 24h sir
Добрый день. Было видео с подробной установкой. По нему и ставил. Сейчас пришлось переустановить операционку и опять нужен ликбез. Буду признателен если поделитесь ссылкой на видос. Спасибо
english please sir
Hello,
the Download for WinCC V15.1 Runtime Professional is Empty blocked.
can you please restart it.
thanks
please sent to me image via image
Hi,
Download the STEP7 & WinCC Professional V15.1 Full , then use TIA PORTAL Application , i did half of the hardware configuration, error is show i,e
Totally Integrated Automation Portal has encounterd a problem and need to closed.
some information may have been lost . This should not have happened – please inform Simens about this problem . All information is treated as confidencial.
what is meant by this error , what is the solution of this issue .
need using sim ekb
hello,
I have downloaded the TIA 15.1 and worked perfectly but now after one month its showing license key expired so, what is the solution for this. how can i rectify this problem , please suggest a solution
You must use SIM-EKB software
Hi. I have tried to install step7 15 many times now, but i still get the same fault in the end of the installation. “some installed products need license. please start automation license manager to install licenses and for an overview about licenses on this computer.”
I have installed automation license manager and EKBsim. All the licenses are installed and checked green in Automation license manager.
What can I be doing wrong?
contact me via email sir
When I select type of controler, shown “Licence ‘STEP 7 Basic’ was not found.
What wrong with it’s?
please see here: https://plc247.com/fix-step-7-has-found-a-problem-with-automation-licence-manager/
You have sinamic V15.1? I need it please.
I will uploas when i have free time
what’s the different between tia portal v15.1 full and step7 wincc pro v15.1 full ?
same sir
algum procedimento para instalar o tia v15.1 e o 16 sem dar conflito no wincc
please comment via english
When I open WinCC Runtime I get the messages “WinCC Runtime license has expired”. What am I doing wrong? Please help. SOS.
using SIM EKB Software
I did it. I used Sim EKB, but it doesn’t help. I tried few Sim EKB’s. When I click “details” it says “License Description: WinCC RT Professional (128). Comment: More than 512 tag. No direct upgrade license possible.”
contact me via email sir
Hi Sir..
Sorry, you can’t view or download this file at this time.
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can’t access a file after 24 hours, contact your domain administrator.
i tried after 24h also.. it seem same repeated.. what to do for this?
need waiting 24h